All efforts are made to display the technology tomorrow, and we should not use colored glasses to look at any technology, especially not to look at the prospect of a technology with the purpose of marketing. For every useful attempt at display technology, we should give more attention and support. In particular, the promotion of each new technology will inevitably encounter various challenges and researches. However, it turns out that every great technology has only been set aside in order to provoke the banner of change.
OLED is undergoing the process of penetration, cost reduction and market acceptance. There are indications that, with the popularity of OLED screen mobile phones, OLED TVs will rapidly develop from the early stage of accumulation, while the following OLED TVs will suffer. The three points will also change dramatically in 2017.

Difficulties in cost may become past tense
In recent years, LGD, the main provider of OLED TV panels, has continued its efforts to reduce costs, but technical characteristics show that the cost reduction process is long and complicated. It is precisely because of this technical characteristic that it forces Samsung to suspend the investment in OLED TV panels around 2010.
It should be said that unlike many LCD manufacturers in the early stages of LCD (Samsung and LGD as the representative of the Korean system and AUO as the representative of Taiwan) to do "LOW COST" different, OLED TV panel face down the pressure on face. Since LGD has almost monopolized the sophisticated technology of OLED panels for TVs, the major responsibility for cost reduction in the past few years has been mainly by LGD.
However, one incident that occurred at the end of 2016 may indicate that this pattern is changing. The debut of the independent OLED TV products jointly created by OLED Lite and Huawei Huawei Hass, and BOE with independent intellectual property panel technology, is a major event in the OLED industry process. This may be a milestone for Skyworth, which has been releasing OLED products for several years.

The biggest significance is the cost reduction. If the audio and video processing chip and the OLED panel are all provided by LGD, then there is no right to speak, and it will inevitably be in a passive position; secondly, it will not be able to form a benign internal competition and can only wait for LGD to have The specific cost reduction plan will be introduced in large scale.
Now the situation is different, OLED TV panels have now one more choice, that is, BOE; OLED TV core also has a solution, that is, Skyworth Huawei's jointly developed TV with Hass chips. As a result, the two major components that make up an OLED TV have the potential to significantly reduce prices.
As the leader of the "Skyworth + Hays + BOE" model, Skyworth is obviously paying more efforts for the promotion of the OLED industry, and this kind of effort may happen in 2017. In the words of Liu Weizhi of Skyworth, the spread between 2016 high-end OLED TVs and LCD TVs of the same size is 2 times, and in 2017 it may be reduced to 1.5 times. The spread of low-end products may fall faster.
North American penetration will be copied to ChinaIn China's color TV industry, there is a company that supports OLED TV. Everyone knows that it is Skyworth. So, what kind of motivation has Skyworth such a firm belief?
In the scientific and technological community, it is known what the high-end market uses, what the secondary high-end market subsequently uses, and finally what the middle and low-end market will use for industrial transfer. That is, the so-called technologically advanced regions are leading the trend of technology. They can drive users in more regions to follow the consumption.
As Liu Weizhi, president of the color TV division of Skyworth Group, said, there has been a consensus in the promotion of high-tech products that the promotion and application in the United States today is equivalent to the promotion and application of China in the future.
The same is true for OLED products. Statistics show that in 2016 China's 55-inch OLED accounted for more than 2,000 US dollars in the market is 44%, but in North America has reached 80%, 65-inch OLED accounted for more than 3,000 US dollars in the market, China currently accounts for 16%, However, North America already accounts for 67%.
LGD news shows that in September 2016, OLED panels sold a total of 1 million units. Especially in the North American market, 55-inch OLED TVs accounted for 77% of the high-end market above US$2,000, and 65-inch OLED TVs accounted for 74% of the market above US$3,000.
Skyworth is just taking this opportunity and it is so firmly promoting the sales of OLED TVs in the Chinese market. In the eyes of Skyworth, after years of preparation, 2017 will be the first year of popularity of OLED TVs in China.

According to Ovid Consulting's forecast, OLED TVs will expand by more than 400% in the Chinese market from 2017 to 2020. In 2017, the speed increase may be more obvious. Forecasts show that during the 51st of May 2017, it will be the first flash point for OLEDs, sales volume will increase five times year-on-year in 2016, and this year's eleventh, sales of OLED TVs are expected to increase 10 times year-on-year.
Obviously, seizing the opportunity of an outbreak will be the biggest beneficiary after the outbreak. This is the reason why Skyworth insists, and it is also the embarrassment that many companies can lead others in a certain technological era. For example, Samsung in the early days of the tablet era, precisely because of the insistence of those years, eventually won the status of the leader in color TV shipment in the history of the world's color TV for more than ten years with the victory of the CRT. At present, Skyworth is trying to draw China's color TV industry towards OLED. In 2017, Skyworth's run will drive the start-up of other companies.
Yield is not a fatal issueAnother big factor that everyone has questioned whether OLED TVs can rise is the yield rate.
In the past two years, LGD did have a cover for the yield of OLED TV panels. However, from the information that has been frequently disclosed by LGD in the second half of last year, the problem of low yield rate has been effectively improved, and the demand for mass production has been met. Lv Xiangde, president of LG Display Division, confirmed that although OLED is more difficult than LCD technology, LGD has maintained its production yield stability at over 80% and has ensured production capacity of more than 100,000 pieces per month. In 2017, the planned production capacity will increase to more than 2 million pieces, and in 2018 it will further expand to 2.7 million pieces.
Whether or not the yield rate meets the mass production demand is not as simple as saying it, but what is certain is that with the increase in sales size in 2017, the time node for checking the yield rate has arrived. For LGD, it is also a test of the level of challenge. If Gao Liang is not used as a bargaining chip, Lu Xiangde will never dare to say so.
Because there are not a few companies that currently push OLED TVs, Skyworth is the most active except for LG. The European market is the Metz brand that it acquired and pushes OLED TVs. The Chinese market is Skyworth pushing OLED TVs. Other companies such as Philips returned last year and played with Penguin TV. In addition, Panasonic, Changhong, Konka and others have all promoted OLED TVs. At the beginning of this year's CES, Sony also released OLED TVs. Because of Sony's involvement in the high-end TV market, OLED TVs may have a few more odds.
If only one or two terminals are promoted, LGD will dare to explore. Faced with such a huge terminal scale, as the most advanced and technologically advanced LGD currently, it is not possible to take stakes in the confidence or products of these companies, because once it fails, the cost will be enormous, leading directly to failure. The possibilities are also great.
The domestic panel giant BOE is obviously ready to support Skyworth's demand for OLED panels. The latest news is that BOE will establish an OLED platform in Hefei with the Hefei municipal government to promote OLED technology research and development and OLED panel production. It is reported that the project will focus on the development of large-size OLED display panels.
Summary: Despite the power of the cloud, it is good for Skyworth OLED TVs. In 2017, this OLED camp was given a special year to promote the first year. Because of the above three changes, the industry is full of expectations for how OLED TVs are performed.
Smart TV/box information can focus on smart TV information network sofa butler (http://), China's influential TV box and smart TV website, providing information, communication, TV boxes, smart TVs, smart TV software, etc. Answering questions.2.54mm (0.1") Pitch Female Headers
Overview
The most commonly seen female headers are 2.54mm (0.1") single or double row female/socket headers. These female headers together with its male counterpart are used in connecting Arduino boards and shields together. 2.54mm pitch female sockets/headers are low-profile connectors designed for signal and low power PC board connections when space is at a premium. They have the perfect height for clearing the USB-B connector and great for stacking multiple shields.
Since 2.54mm pitch female header is commonly used in a lot of applications, Scondar offers numerous options for this type of female header. Orientation can either be SMT or THM, single, dual or triple row. Antenk offers 2.54mm pitch female headers in either vertical or right-angle orientation. The pins and blades are also available in various sizes, counts, amperages, and plating.
The 2.54mm can accommodate a maximum current of 3A, with a 30 to 22 AWG wire size, and up to 40-positions. Antenk offers these female headers in high quality and affordable China-quoted price that snuggly fits with the pins of a male header and acts as a receptacle.
If you can not find the items you interest from above items, welcome to contact us, and you will always get fully responsive from us.
Applications of 2.54mm Pitch Female Headers
Electronics:
LED applications
Arduino boards
Arduino Pro
Arduino Mega
Solar applications
Weighing systems
Appliances:
Air conditioner
Refrigerator
Microwave oven
Washing machine
Water heater
Shower toilet
Washer/Dryer
Stove
Automotive, Heavy Duty Military and Marine
For densely packed equipment requiring weight reduction and downsizing and for tough and harsh conditions.
Vehicle infotainment
Computer peripherals
Battery Connections
Battery connections rely on the ability of the current to pass reliable and solid current. This prevents overheating in the circuit and voltage drop.
Rechargeable battery packs
Battery balancers
Battery eliminator circuits
Medical Diagnostic and Monitoring equipment
Heart monitors
Telecoms
Datacoms
Mount Type: Through-hole vs Surface Mount
At one side of this female header is a series of pins which can either be mounted and soldered directly onto the surface of the PCB (SMT) or placed into drilled holes on the PCB (THM).
Through-Hole (Poke-In)
Best used for high-reliability products that require stronger connections between layers.Aerospace and military products are most likely to require this type of mounting as these products experience extreme accelerations, collisions, or high temperatures.
Useful in test and prototyping applications that sometimes require manual adjustments and replacements.
2.54mm, 1-row vertical female header, 2.54mm, 2-row vertical female header, 2.54mm, 3-row vertical female header, 2.54mm, 1-row right-angle female header and 2.54mm, 2-row right-angle female header, 2.54mm U-
Shaped Female header, 2.54mm U-Shaped Dual Row Female header are examples of Antenk products with through-hole mount type.
Surface-Mount
The most common electronic hardware requirements are SMT.
Essential in PCB design and manufacturing, having improved the quality and performance of PCBs overall.
Cost of processing and handling is reduced.
SMT components can be mounted on both side of the board.
Ability to fit a high number of small components on a PCB has allowed for much denser, higher performing, and smaller PCBs.
2.54mm, 2-row right-angle female header and 2.54mm, 1-row right-angle female header are Antenk`s featured SMT female headers.
Orientation/Pin-Type: Vertical (Straight), Right-Angle and U-Shaped
2.54mm pitch female headers may be further classified into pin orientation as well, such as vertical or straight female header, right-angle female header or U-shaped female header.
Vertical or Straight Female Header Orientation
One side of the series of pins is connected to PCB board in which the pins can be at a right-angle to the PCB surface (usually called "straight" or [vertical") or..
Right-Angle Female Header Orientation
Parallel to the board's surface (referred to as "right-angle" pins).
U-Shaped Female Header Orientation
U-shaped orientation is characterized by the shape of the pins at one side of the header, forming a letter [U". It is often chosen for applications where repeat mating cycles are not required as it can also be used and soldered directly to both PCB's.
Each of these pin-types have different applications that fit with their specific configuration.
Single, Dual or Multiple Number of Rows
For a 2.54mm straight or vertical female header, the standard number of rows that Antenk offers ranges from 1 to 2 rows. However, customization can be available if 3, 4 or n number of rows is needed by the customer. Also, the number of contacts for the single row is about 2-40 pins while for dual row, the number contacts may vary from 2-80 pins.
Pin Material
The pins of the connector attached to the board have been designed with copper alloy. With customer`s demand the pins can be made gold plated.
Custom 2.54mm Pitch Female Headers
Customizable 2.54 mm pitch female headers are also available, making your manufacturing process way faster as the pins are already inserted in the headers, insulator height is made at the right size and the accurate pin length you require is followed.
Parts are made using semi-automated manufacturing processes that ensure both precision and delicacy in handling the headers before packaging on tape and reel.
Tape and Reel Packaging for SMT Components
Antenk's SMT headers are offered with customizable mating pin lengths, in which each series has multiple number of of circuits, summing up to a thousand individual part number combinations per connector series.
The tape and reel carrier strip ensures that the headers are packaged within accurately sized cavities for its height, width and depth, securing the headers from the environment and maintaining consistent position during transportation.
Antenk also offer a range of custom Tape and reel carrier strip packaging cavities.
Pcb Header Connector,2.54Mm Female Pin Header,2.54Mm Pcb Header,2.54Mm Pcb Connector,0.1" Pitch Female Headers,2.54mm SMT Female Pin Header, THT 2.54mm Female Pin Header
ShenZhen Antenk Electronics Co,Ltd , https://www.antenkconn.com