Notice of Tender for Bidding Project of Airport Capacity Evaluation of Phase III Expansion Project of Lanzhou Zhongchuan International Airport

The Lanzhou Airport Phase III Expansion Project is a key airport promotion project for 2018 that was included in the National “Three-Year Action Plan for Major Infrastructure Construction of Transport Infrastructure” (Development and Reform Foundation [2016] No. 730). In order to promote the construction of Phase III expansion project of Lanzhou Zhongchuan International Airport, an open tender for the evaluation of airport capacity is required. The bidder was Gansu Provincial Civil Aviation Airport Group Construction Command.

2. Project overview and scope of tender
2.1 Project Overview
The flight area of ​​the Lanzhou Zhongchuan International Airport Phase III expansion project is 4E. A new runway with a length of 4,000 meters and a width of 60 meters will be built to meet the requirements for the preparation of Class F (A-380) aircraft; The taxiway has a length of 4,000 meters and a width of 23 meters (25 meters). There are also two parallel taxiways on the west side of the 2nd runway. The length is 4,000 meters and the width is 25 meters (23 meters); there are 72 flight stations. 35 parking spaces on the apron, 2 flight positions on the cargo apron, 8 flight stations on the deicing platform, 1 new tower and auxiliary buildings, 1 new control center building, 1 shift dormitory, 1 turnover room, 1 Block supporting and ancillary room, 1 integrated business room; New freight room in freight area; New 1240 square meters of fire duty station, a new 2,500 square meter fire fighting host; New 2# rescue center, building area 1000 square meters; Newly built 2 # water supply station; Newly built 343,000 square meters of terminal building, with 56 nearby stations and corresponding supporting facilities.
2.2 The scope of the tender:
The scope of this project is to evaluate the airport capacity of the Phase III expansion project of Lanzhou Zhongchuan International Airport. According to the civil aviation authority and the international civil aviation and civil aviation industry management regulations, this project carries out a comprehensive airspace assessment analysis and verification, including military and civil aviation data collection, civil and military aviation domain conflicts. Analysis, research and formulation of airspace contradiction solutions, airport airspace joint simulation assessment, and issuance of reports.
2.3 Quality Requirements
Through the review organized by the national industry authority, and approved by the national industry authority.
2.4 Design results submission time:
Before March 31, 2017.
3. Bidder qualification requirements
3.1 The bidders participating in the project design bidding must meet the following conditions:
(1) The bidder shall have an independent legal personality and provide a copy of the copy of the industrial and commercial business license that has passed the annual inspection (with the official seal of the bidder unit);
(2) In the past five years (January 1, 2012 to present), the performance of airport airspace capacity assessment for airports with at least one double runway grade 4E and above has been undertaken (provided contract performance and owner’s certification are required, non-Chinese materials must be provided in Chinese translation);
(3) Chief person in charge of the project: For the past five years (January 1, 2012 to present), he has served as the design leader of the airspace capacity evaluation of a dual-runway airport with a grade of 4E and above;
3.2 The Commonwealth does not accept bids from the Consortium.
3.3 Two or more legal persons whose legal representative is the same person, the parent company, wholly-owned subsidiary company, its holding company, and other bidders who have an asset-related relationship may not bid at the same time in the same tender project.
4. Bid registration
4.1 Applicants are requested from February 14, 2017 to February 21, 2017 (excluding official holidays), daily from 9:00 to 11:30, and from 13:30 to 16:00 (Beijing time, next with)

Business Tablet

A business tablet must have powerful business functions. At present, users use tablet products more for entertainment, and insufficient development of commercial value has become a major factor restricting the development of tablet computers. Many far-sighted terminal manufacturers have set their sights on the business tablet field.
Generally speaking, when business users choose tablet PC products, they still focus on "regular items" such as processor, battery, operating system, and built-in applications, especially office software applications, which are a good helper for business users.
First of all, there must be powerful office software such as customer management software, which can record customer data and related information anytime, anywhere. There is also a need for powerful marketing software, software marketing, reducing manual intervention, and one person can handle all the publicity and customer information.

Business Tablet,4k Tablet,5G Tablet

Jingjiang Gisen Technology Co.,Ltd , https://www.jsgisentec.com

This entry was posted in on