Keyboard cleaning

Generally, a desktop computer will not be equipped with a keyboard membrane. Therefore, using the keyboard for a long time will leave a lot of dust in the gap on the keyboard and affect the life of the keyboard. Seeing so much dust, the mood becomes very bad when using the keyboard, so how to remove the dust on the keyboard?

As we are not very fooled with the computer, even if the keyboard is dismantled, washed, dried, dried, it may not fit back. This relatively time consuming and costly method Xiaobian also find it difficult to accept. Besides, I can't dismantle the computer in the company just in front of the director. Then what keyboard do I use for work? Therefore, Xiao Bian introduces several simple and quick methods here to remove the dust from the keyboard. Of course, there will be no cleanness to remove the keyboard, but relatively speaking, remove some dust and delay the life of the keyboard.

1. Clean the kit, cotton cloth, brush, cleaning liquid or swab, cotton cloth, alcohol, detergent with a small brush or use a used toothbrush to wipe the dust and debris on the keyboard surface with a brush. Next, wipe the keyboard surface and the keycap with a special cloth in a cotton cloth or cleaning kit, wipe with a little cleaning liquid or liquid with water and detergent, and avoid too much cleaning liquid to flow into the keyboard. Afterwards, it can be wiped again with a moist clean cotton cloth, and the surface work is basically finished. If you don't feel enough, you can do a deep cleaning of the keyboard, turn the keyboard over, flip it face down, some unexpected debris will be cleared out, and then use a cotton swab dipped in a little cleaning fluid, each key Wipe the gap around the cap thoroughly, if you do this process may take a lot of time and effort.

2. Leather tiger A tool to remove dust, put the keyboard upside down or inverted, with a leather tiger to blow the gap in the tight keyboard, and blow off the coarse dust inside; then use a brush to brush the gap finely, look The resulting dust is brushed clean; finally, the entire surface of the keyboard is wiped with a piece of cotton cloth.

3. Universal plasticine is a little bit like plasticine. Put plasticine on the keyboard and press it down. After a while, pick up the plasticine and repeat the previous action. Wipe the dust in all places. Clear the dust on the keyboard.