
A number of NVIDIA mobile partners stated that the company is likely to introduce the Kepler architecture's CUDA Core in Tegra.
The graphics API of Windows 8 supports DirectX 11.1. For this point, ARM's previously announced GPU Mali-T600 series has announced support for DX 11.1. It is expected that the mid-2012 sample will be available. At present, the Ultra Low Power GeForce (ULP GeForce) core integrated in the Tegra 2 and Tegra 3 is based on the GeForce 6 Direct X 9 era (Actually, it is closer to the G70). Previously in July there was news that NVIDIA plans to adopt the unified rendering architecture, the G80-like CUDA core, for the first time in the next-generation Tegra. Now it seems that this goal will directly evolve into adding the Kepler core supporting Direct X 11.1 to Wayne.
According to sources of large mobile device manufacturers, NVIDIA has considered support for Direct X 11 in the Tegra 3 era, but due to the adjustment of the Fermi-based CUDA core to GPGPU, the relatively high power consumption is not suitable for mobile products. The single CUDA energy ratio of the Kepler generation has been improved, making it possible to integrate Tegra.
In addition, the previously announced Tegra 3 enhanced version of the Kal-El+ roadmap shows that this is an SoC designed specifically for ARM-based Windows 8 tablets. The default frequency is higher than the current Tegra 3.
There is also a combination of Grey, the Tegra, and Icera 3G/4G LTE basebands that were introduced in 2013. As the only NVIDIA SoC chip codenamed Women (X-Men's Jean Grey), Grey also faces Windows Phone.
To sort out these news, the future Tegra will be divided into three major developments:
—Windows on ARM, an ARM-based Windows 8 system notebook and tablet with the highest performance — SoC for tablets and smartphones
- SoCs for smartphones, integrated 3G/4G baseband
It is expected that the CUDA Core of the Kepler architecture will only be put into use on the first type, namely WoA Tegra.
Retractable cable is usually double-pull-style.
Usage: double pull retractable cable, take the two ends of the retractable cable with two hands.Pull in the opposite direction and there will be a click in the middle. Repeat several times and choose your own length.When not in use, pull out a little bit when you hear the voice, let go of the telescopic cable will automatically retract.
The retractable cable is very easy to carry. Generally, 1 to 2 meters of net wire is made flat and soft wire, which is made into a coil with spring zhuan and other things. It can be stretched as long as you need, and retract back when not used, like a tape measure.
Retractable Ethernet,Retractable Ethernet Cable,Retractable Cat6 Cable,Retractable Network Cable
Shenzhen Kingwire Electronics Co., Ltd. , https://www.kingwires.com