This product is a series of downward extensions after a new generation of high-performance metal-clad LED power supplies such as PLD-100H/100W, PLD-120H/120W, PLD-150H/150W, PLD-200H/200W, and PLD-250H/250W. Can be used in any part of the world's power system (90V-305V). This series covers constant voltage or constant current output from 9W to 30W, suitable for 1W to 3W LED chips, current from 200MA to 900MA. Use OPEN FRAME or high temperature resistant plastic housing with IP20 protection requirements.
This series of products has built-in active power factor correction PFC (Active PFC) function to meet the requirements of EN61000-3-2 for EU harmonic interference limitation for lighting products, and has the ability to withstand industrial grade instantaneous lightning strike 2KV ( EN61000-4-5), and meet the requirements of primary to secondary: 3750Vac / 10mAMax / 60 seconds (high pressure test time during production: 3 seconds).
The basic functions included in this series include short circuit protection, overload protection, over voltage protection and over temperature protection. A new generation of high-efficiency technology is adopted in the line architecture, which makes the work efficiency up to 90%.
This series of products meets international certifications such as UL/CUL/TUV/CB/CE, including lighting regulations such as UL8750 and EN61347-2-13, which are safe and worry-free to use.
Features of this series:
• Wide range of 90~305VAC AC input • Operating temperature range: -25°~+60°
• OPENFRAME or plastic case (IP20)
• Can withstand instant lightning strike 2KV (EN61000-4-5)
• Built-in active power factor correction (PFC), in line with EU harmonic current specification EN61000-3-2 • Up to 90% efficiency
• Protection function: short circuit protection, over voltage protection, overload protection, over temperature protection • Series models: PLD030 PLD024 PLD015 PLD010
• Comply with UL / CUL / TUV / CB / CE and other international certifications
Introduction to POWERLAND
Nanjing Bolande Electronic Technology Co., Ltd. is an independent company with the world's fifth largest power product supplier, Quanhan Group, as its main investor. Since its establishment in early 2009, under the leadership of Dr. Xu Ming, a world-renowned power electronics expert, Boland has gathered a number of cutting-edge research and development forces at home and abroad, including many Dr. Haigui. Boland combines superior innovation and rich product development experience to design and produce high-end power electronics with high efficiency, high reliability, long life and high power density.
The lithium Battery Protection Board is the charge and discharge protection for the series-connected lithium battery pack; when fully charged, it can ensure that the voltage difference between the individual cells is less than the set value (generally ±20mV), so as to realize the equal charge of each single cell of the battery pack. , effectively improving the charging effect in the series charging mode; at the same time, it detects the overvoltage, undervoltage, overcurrent, short circuit, and overtemperature status of each single cell in the battery pack to protect and prolong the battery life; undervoltage protection makes each A single-cell battery is used to avoid damage to the battery due to overdischarge.
Lithium Iron Battery,Lithium Iron Battery Board,Industrial Control Board,Medical PCBA Board,Circuit Board Assembly
Huizhou Liandajin Electronic Co., Ltd , https://www.ldjcircuitboard.com