With the development of the electronics industry, electronic test equipment manufacturers have sprung up, and the number of domestic large-scale plug-in testing machines has reached more than one hundred. reliability
Insertion force testing machine
The application in the electronics industry has played a role in boosting the competitiveness of China's electronic processing and electronic brands.
Once the instrument absorbs dust and dirt, it not only affects the performance of the instrument, shortens the service life, but also affects the appearance and the physical and mental health of the user. The instrument will be dust and dirt during use or storage, so that it is mainly dustproof and antifouling. Frequent dust removal is an important part of the maintenance and maintenance of the automatic insertion force testing machine.
Most of the dust is tiny dust particles with a small amount of static electricity. It often floats in the air and moves with the airflow. The object adheres to it and is almost impervious. The dust adheres to the edge of the model and affects its color. The moving parts are dusty. It will increase wear and tear, and there will be dust on the electrical appliance. In severe cases, it will cause short circuit, electric leakage, dust on valuable instruments, and serious equipment will be scrapped.
Fully automatic insertion force testing machine
There are many ways to remove dust, mainly depending on the condition of the dust-attached surface and the degree of dust adhesion. In dry air, if the dust is less or the dust has not been wetted to form a fast spot, it can be used for cloth wiping, towel 掸Wipe, soft brush and other methods to clear the dust on the general instrument; the dust inside the instrument can be used for skin dust, the ear ball pump can be blown and dusted, and the vacuum cleaner can also be used to vacuum; diagonally, the dust in the seam can be The above several methods are combined to remove dust. However, for valuable precision instruments, such as optical instruments, instrument heads, etc., dust removal by the above method may damage the instrument. In this case, special dust removal tools should be used to remove dust, such as wiping with lens paper, stained with alcohol. Cotton ball wipes and so on.
Fully automatic insertion force testing machine
When the air is humid, dust and squash, the dust should be wiped with a damp cloth. Diagonally, the ash in the seam can be removed with a sharpened soft strip and then wiped with a damp cloth, but for the faded surface, the appliance Do not wipe with a damp cloth. If the gray scale is not easy to wipe clean, use a cotton ball with alcohol or cotton to test it, or clean it.
We make OBD connector with terminal by ourselves, soldering type and crimping type are both available. Also 12V and 24V type. OBD1, OB2, J1939, J1708, J1962, etc. Also molded by different type, straight type or right-angle type. The OBD connector cables used for Audi, Honda, Toyota, BWM, etc. We have wide range of materials source , also we can support customers to make a customized one to replace the original ones.
Vehicle Diagnostic Cables,Diagnostic OBD Cable,OBD2 Splitter Y Cables,OBD2 Diagnostic Adapters,OBD Heavy Vehicle Cables
ETOP WIREHARNESS LIMITED , https://www.oemwireharness.com