Editor's words
With the increasingly tight resources and energy, launching green lighting projects and promoting high-efficiency energy-saving products have become one of the key points in building a conservation-oriented society in China. As an energy-efficient product, energy-saving lamps save 80% of electricity compared to incandescent lamps, and have obvious energy-saving effects.
Although the energy-saving lamps are small, they are closely related to the daily lives of ordinary people. Promoting energy-saving lamps is not only the work of the government, but also an important way for everyone to participate in building a conservation-oriented society. In the form of confession of energy-saving lamps, the reporter pointed out the problems encountered in the promotion of energy-saving lamps. I hope that through our reports, more people will understand the energy-saving lamps, promote the healthy development of the energy-saving lamp industry, and let energy-saving lamps truly enter the homes of the people.
I am a self-ballasted fluorescent lamp for general lighting, which is generally called my energy-saving lamp. I am proud of the D?D incandescent lamp that was born more than 100 years ago. Not because of youth, but because of my high light efficiency and strong vitality. However, many people do not understand me or are misunderstood, which makes me very distressed.
Worry one: I don't understand my true ability
If we replace all incandescent lamps with us, we will save one year of power generation from the Three Gorges Power Station.
I was born in the Netherlands in the 1970s. Although after 30 years of development, there are still many people who don't know how to save energy. In fact, it is very simple. We are totally different from the principle of incandescent lighting.
The working principle of incandescent lamps has not changed much since more than a hundred years ago. It relies on electric current to heat the filaments to an incandescent state. Due to the high temperature of the filament during operation, only 7% to 8% of the electrical energy is converted into visible light, and more than 90% of the electrical energy is converted into heat, which is wasted in the form of infrared radiation. The filament temperature is high and the evaporation is fast, so the life is shortened, about 1000 hours.
I use the rare earth trichromatic phosphor as the raw material, and the filament is heated by the ballast. The temperature of the filament when I work is about 1160k, which is much lower than the temperature of the incandescent lamp working 2200k? D2700k, so my life is also greatly Improve, reach more than 5,000 hours.
Simply put, I belong to a gas discharge source, and incandescent lamps are heat radiation sources. We save 80% of electricity compared to incandescent lamps, 5 times longer than incandescent lamps, and 3.5 times more efficient than incandescent lamps. The only regret is that because of the high cost, the value is several times higher.
However, experts have shown that we can ultimately help the owner to reduce costs. Compared with the D?D illuminometer, the 11-watt energy-saving lamp and the 60-watt incandescent lamp have similar brightness. If I use 5000 hours of calculation, I only need to use 55 degrees of electricity, and incandescent lamps need to use 300 degrees of electricity, calculated at 0.4883 yuan per kilowatt. For 20 yuan, I spend a total of 26.86 yuan of electricity, 2 yuan of incandescent The lamp costs the owner's electricity fee of 146.49 yuan.
It is a pity that many people do not take my skills seriously, and they are not willing to take the time to calculate these. They think that this waste is nothing compared with large consumers such as air conditioners. However, if we replace all incandescent lamps with us, we will save one year of power generation from the Three Gorges Power Station!
Worry 2: I don't know how to use it.
I hope consumers can learn more about us and let us play the most effective role.
Light decay, illuminance, lumens, color temperature... These are the terminology that professionals have created to describe the characteristics of light source lighting, but ordinary consumers do not know this. In many cases, as long as the price is acceptable, the lamp will illuminate after power-on. Oh, I really don’t know about Egypt.
Under normal circumstances, after we use it for a period of time, as the phosphor is lost, it will be darker and more technically called light decay. Light decay is one of the important criteria to measure the quality of our products. High quality can guarantee the most accurate light decay during use. Therefore, check the quality of our products, not only when they are energized, but also need to be Learn about the useful life of our labels.
1 2 Next Page
With the increasingly tight resources and energy, launching green lighting projects and promoting high-efficiency energy-saving products have become one of the key points in building a conservation-oriented society in China. As an energy-efficient product, energy-saving lamps save 80% of electricity compared to incandescent lamps, and have obvious energy-saving effects.
Although the energy-saving lamps are small, they are closely related to the daily lives of ordinary people. Promoting energy-saving lamps is not only the work of the government, but also an important way for everyone to participate in building a conservation-oriented society. In the form of confession of energy-saving lamps, the reporter pointed out the problems encountered in the promotion of energy-saving lamps. I hope that through our reports, more people will understand the energy-saving lamps, promote the healthy development of the energy-saving lamp industry, and let energy-saving lamps truly enter the homes of the people.
I am a self-ballasted fluorescent lamp for general lighting, which is generally called my energy-saving lamp. I am proud of the D?D incandescent lamp that was born more than 100 years ago. Not because of youth, but because of my high light efficiency and strong vitality. However, many people do not understand me or are misunderstood, which makes me very distressed.
Worry one: I don't understand my true ability
If we replace all incandescent lamps with us, we will save one year of power generation from the Three Gorges Power Station.
I was born in the Netherlands in the 1970s. Although after 30 years of development, there are still many people who don't know how to save energy. In fact, it is very simple. We are totally different from the principle of incandescent lighting.
The working principle of incandescent lamps has not changed much since more than a hundred years ago. It relies on electric current to heat the filaments to an incandescent state. Due to the high temperature of the filament during operation, only 7% to 8% of the electrical energy is converted into visible light, and more than 90% of the electrical energy is converted into heat, which is wasted in the form of infrared radiation. The filament temperature is high and the evaporation is fast, so the life is shortened, about 1000 hours.
I use the rare earth trichromatic phosphor as the raw material, and the filament is heated by the ballast. The temperature of the filament when I work is about 1160k, which is much lower than the temperature of the incandescent lamp working 2200k? D2700k, so my life is also greatly Improve, reach more than 5,000 hours.
Simply put, I belong to a gas discharge source, and incandescent lamps are heat radiation sources. We save 80% of electricity compared to incandescent lamps, 5 times longer than incandescent lamps, and 3.5 times more efficient than incandescent lamps. The only regret is that because of the high cost, the value is several times higher.
However, experts have shown that we can ultimately help the owner to reduce costs. Compared with the D?D illuminometer, the 11-watt energy-saving lamp and the 60-watt incandescent lamp have similar brightness. If I use 5000 hours of calculation, I only need to use 55 degrees of electricity, and incandescent lamps need to use 300 degrees of electricity, calculated at 0.4883 yuan per kilowatt. For 20 yuan, I spend a total of 26.86 yuan of electricity, 2 yuan of incandescent The lamp costs the owner's electricity fee of 146.49 yuan.
It is a pity that many people do not take my skills seriously, and they are not willing to take the time to calculate these. They think that this waste is nothing compared with large consumers such as air conditioners. However, if we replace all incandescent lamps with us, we will save one year of power generation from the Three Gorges Power Station!
Worry 2: I don't know how to use it.
I hope consumers can learn more about us and let us play the most effective role.
Light decay, illuminance, lumens, color temperature... These are the terminology that professionals have created to describe the characteristics of light source lighting, but ordinary consumers do not know this. In many cases, as long as the price is acceptable, the lamp will illuminate after power-on. Oh, I really don’t know about Egypt.
Under normal circumstances, after we use it for a period of time, as the phosphor is lost, it will be darker and more technically called light decay. Light decay is one of the important criteria to measure the quality of our products. High quality can guarantee the most accurate light decay during use. Therefore, check the quality of our products, not only when they are energized, but also need to be Learn about the useful life of our labels.
1 2 Next Page
Geekvape Vape,Geek Bar Disposable Vape,Geek Bar Vape Kit,Geek Bar Vape Pod
TSVAPE Wholesale/OEM/ODM , https://www.tsvaping.com