China-Single-Pipe-Power-Transmission-Steel-Pole

1. Polygonal Face/Round faces
2. Hot dip galvanization
3. ISO9001
4. Q345B/Q235B
Available height 5-80m
Electric pressure 10kv--550kv
Material Q345B/A572,minimum yield   strength>=345MPA,
Q235B/A36,minimum yield strength>=235MPA
Galvanized Hot dip galvanization,thickness   is>=12um
Delivery lead time 30 days after receiving 30% deposit
Lifetime Minimum 25 years
Structure Overlap connection/Flange connection
Galvanizing standard EN ISO 146,ASTM/A123
Manufacturing and workmanship BS449 or AISC
Welding standard BSEN287,BSEN288 or equivalent

Ribbon Cable Connectors

1.ANTENK Insulation Displacement termination connectors are designed to quickly and effectively terminate Flat Cable in a wide variety of applications. The IDC termination style has migrated and been implemented into a wide range of connector styles because of its reliability and ease of use. Click on the appropriate sub section below depending on connector or application of choice.


2.Our products are widely used in electronic equipments,such as monitors ,electronic instruments,computer motherboards,program-controlled switchboards,LED,digital cameras,MP4 players,a variety of removable storage disks,cordless telephones,walkie-talkies,mobile phones,digital home appliances and electronic toys,high-speed train,aviation,communication station,Military and so on

MFCM01 -XXXXX1.27mm Micro Match Socket 180° SMTMFCR01 -XXXX 1.27mm Micro Match Socket 90° DIPMFCS01 -XXAXX 1.27mm Micro Match Socket 180° DIP



SPECIFICATION
Current Rating: 1.0Amp
Insulation Resistance: 1000MΩ min
Contact Resistance: 20mΩ max
Withstand Voltage: 500V AC/DC
Operating Temperature: -40°C to +105°C
Contact Material: Phosphor Bronze
Contact Plating: Au Over Ni
Insulator Material: High Temperature plastic UL94V-0



Ribbon Cable Connectors,Cable Connector,Cable Assembly,Connector Flat Ribbon Cable,Box Header Connector,Latch Header Connector,IDC Socket Connector,Dip Plug Connector

ShenZhen Antenk Electronics Co,Ltd , https://www.pcbsocket.com

This entry was posted in on