Cat.6 RJ45 Shielded Keystone Jack
cat6 stp keystone jacks,rj45 cat6 ftp keystone jack
1. Meet TIA/EIA-568-A and TIA/EIA-568-B CAT5E/Category 6 requirements
2. Meet TIA/EIA TSB-40;Meet ISO/IEC Generic Cabling Standard 11801
3.Meet CENELEC Generic Cabling Standard EN50173
Â
| Item: | Specification: |
| Product Name: | Keystone Jack GL-1129 |
| Model: | GL-1129 |
| Performance Category: | Cat.6 |
| Jack Type: | RJ45 |
| Number of position: | 8 |
| Application: | Ethernet cable connector |
| Contact: | Phosphor bronze |
| Solid wire: | 22-26 AWG |
| Wiring Patter: | T568A/568B |
| Temperature: | -40°C to 70°C |
| Housing: | S tainless steel  |
| Angle: | 90 degree |
| Current rating:  | 1.5 Amp Max  |
| Insulation Resistance: | 500M-ohm  |
| Termination Stype: | Toolless |
| Dust Cover: | With |
| Material: Â | PC Â |
| Color: | Black |
| Weight: | 16g  |
| Region: | Asia |
Cat.6 RJ45 Shielded Keystone Jack
cat6 stp keystone jacks,rj45 cat6 ftp keystone jack
1. Meet TIA/EIA-568-A and TIA/EIA-568-B CAT5E/Category 6 requirements
2. Meet TIA/EIA TSB-40;Meet ISO/IEC Generic Cabling Standard 11801
3.Meet CENELEC Generic Cabling Standard EN50173
Â
| Item: | Specification: |
| Product Name: | Keystone Jack GL-1129 |
| Model: | GL-1129 |
| Performance Category: | Cat.6 |
| Jack Type: | RJ45 |
| Number of position: | 8 |
| Application: | Ethernet cable connector |
| Contact: | Phosphor bronze |
| Solid wire: | 22-26 AWG |
| Wiring Patter: | T568A/568B |
| Temperature: | -40°C to 70°C |
| Housing: | S tainless steel  |
| Angle: | 90 degree |
| Current rating:  | 1.5 Amp Max  |
| Insulation Resistance: | 500M-ohm  |
| Termination Stype: | Toolless |
| Dust Cover: | With |
| Material: Â | PC Â |
| Color: | Black |
| Weight: | 16g  |
| Region: | Asia |
Polymethyl methacrylate (polymethyl methacrylate, also known as acrylic or plexiglass), is also known as Agali glue in Hong Kong. It has the advantages of high transparency, low price, and easy processing. It is a commonly used glass substitute material . The polymethyl methacrylate monomer is methyl methacrylate (MMA, acrylic monomer). Excellent transparency and excellent aging resistance; its ratio is less than half of ordinary glass, but its resistance to fragmentation is several times higher. It has good insulation and mechanical strength, and has strong resistance to acids, alkalis, and salts. It is corrosive and easy to process. It can be glued, sawed, plane, drilled, engraved, polished, screen printed, sandblasted and other manual mechanical processing. After heating, the pressure mold can be bent into various acrylic products.
Fresnel Lens is equivalent to infrared and visible light convex lens in many cases, the effect is better, but the cost is much lower than ordinary convex lens. It is mostly used in occasions where accuracy is not very high, such as slide projectors, film magnifiers, infrared detectors, etc.
The Fresnel lens has two functions: one is focusing, that is, the pyro-infrared signal is refracted (reflected) on the PIR, and the second is to divide the detection area into several bright and dark areas, so that it can enter the detection area A moving object can produce a changing pyro-infrared signal on the PIR in the form of a temperature change.
Plastic Fresnel Lens,Focal Length Lens Fresnel,Diy Fresnel Lens,Solar Concentrator Lenses
Bohr Optics Co.,Ltd , https://www.bohr-optics.com