In May, a colleague with a good relationship asked me to install a computer. Since I was not too impatient, I waited until the 618 event. I share with you the problems encountered in the distribution of ideas, orders, and overclocking.
Budget 10,000, CPU is not limited, not water-cooled, ROG/NVDIA fans, 2K 27 or 32 monitors, light pollution can but can not kill colorful Matt head, peripheral-owned
The main play battlefield 1 / DOTA2 and Steam and Origin of a large number of stand-alone, occasionally WOW look at the scenery (he did not know to go up to see 75 yuan ...)
Hesitated or chose MATX
The first is that ATX doesn't need to split the water, so the chassis space is not good-looking, and the one-piece water is afraid of the leakage that burns the 1080.
The second is that the volume is relatively small and can be placed on the table under the table, especially the MATX of the chasing wind is as large as the ATX.
Colleagues intend to start the 7700K+Z270A
But I feel that other accessories shrink too much, and is not playing online games, then I think 1600/1700/1600X is a good choice to watch the main battlefield 1 / DOTA2 support 8-core (the picture shows the Battlefield 4 runtime CPU utilization)
Watch Pioneer and Crysis 3 support 6 cores. It is estimated that more and more games that support multi-core games will not be considered for upgrade. Generally, it is used to 3-5 years to change the package to take into account both online games and multiplayer games such as OW and BF1. Discard 1700 more frequently selected 1600X
Colleagues said that they still want to repay the beliefs of the ROG but the budget is limited. They are not eager to fight for the future, but I am afraid that the Battlefield 5 will have 60 frames at 2K and 1080 is 50-55 frames. Dissatisfaction with dissatisfaction. My colleagues indicated that they can raise the budget to Without display pure chassis 10000 then graphics card ROG1080 even settled


I have proposed 3 light pollution solutions for the chassis
1. Blackboard + red configurationIN WIN 301 or JONSBO RM3
CORSAIR CMU16GX4M2C3200C16R red light
JONSBO CR-201 Red CPU Cooler
JONSBO FR-201P - Hyun Red 12CM Chassis Fan
2. Whiteboard + Blue/White (Deprecated after 1080ROG selected)IN WIN 301
SUPER FLOWER LEADEX G550
CORSAIR CMU16GX4M2C3200C16 white light
Galaxy GTX 1070 HOF
JONSBO CR-201 White CPU Cooler
JONSBO FR-201P-Hyun white 12CM chassis fan
3. Blackboard RGB configuration
PHANTEKS 314ETG
Tt Riing 300px RGB Set Software Edition
G.SKILL Trident Z RGB Series Phono DDR4 3200 Frequency (8G×2)
PHANTEKS COMBO Chassis Light with 7 Color Adjustable RGB-LED Light Bars
I prefer monochrome but ROG 1080 itself is RGB
Colleagues liked the appearance of the 314 but a new problem was that the illusion, 314, and ROG1080 all supported the ASUS SYNC while the Asus B350M did not support the AURA SYNC.
X370 only big board support
The RGB once there is no AURA SYNC unified control will immediately become a colorful kill Matt head village Di Di well known this time AM4 Asus's board did not very good, especially if the memory support if using 515ETG + PRIME X370-PRO + ROG STRIX- GTX1080+ Mirage will greatly increase budget
1600X does not buy a suit too loss, I would rather buy back 7700K + Z270A
And Riing doesn't support AURA SYNC or can't sync
I personally do not like to add money
How about using the GTX 1080 GAMING X + X370 KRAIT GAMING +515ETG with Mystic Light Sync to turn off the light fan and the illusion?
Although the red dragon is the highest frequency 1080
But I still think there is no ROG tall, this ancestral heat I 999 1050Ti also have ...
And Mystic Light Sync control only the scope of the chassis video card motherboard light belt, after all, there is no more ASUS cooperation manufacturers, and finally I gave up a full set of RGB program, take the video card + memory + chassis switch with lights like




On the evening of May 31st, we haven’t seen a full reduction of 618 activities. In general, at 0:00 on June 1st, various BUG prices are prone to occur. However, I may be 10 points old and awake and wake up more than 3 times. A reduction of 20 is awesome, but it is a pity that CUP’s 30-per-single reduction is not, otherwise the RMB 69 AKG K420 AIDS
As my colleagues did not have a good signal in Jiuzhaigou tourism mountain, I first put the chassis power supply and the last 3 fan locks, and found that the new version of O8G-11GBPS is also cheaper than the A8G, and there are also special prices for the solid state. They are locked together and contacted colleagues in the morning. I hand it over to me.



Before the CPU motherboard package originally planned 1600x from 2250-2348 back to the original price, so locked a single 1700, hesitant Taobao 539 buy MSI B350M BAZOOKA (white LED lamp with memory) or Jingdong buy MORTAR (red light, more than a PCIe X4 Slots) When I was eating lunch, I discovered that the 1600+MORTAR came and bought it.
What is a pity is that he did not grab the monkey scrolls of 5000-618 and 3000-300. Several punctuality mobile phones and computers were not able to grab it. This volume could not be presented only on behalf of the order. I had to order the diamond + PLUS members separately. With 20-30 coupons + Jingdong Treasury to pay discounts.
Total 10379 yuan

As the saying goes, I think that there are three best time points for DIY.
1. Order payment
2. Unpacking
3. The light up moment
Then it will fall into endless emptiness
I do not have the habit of pre-installing the light and then into the chassis on the paper box, usually light up the first time the self-test is very slow, feel what is written, into the motherboard BIOS to insert the U disk update to the latest 1.4
Memory settings AXMP file 2 Tried 3200, Failed to boot Failed to boot Shorted pin cleared CMOS
F6 load default settings and set to try 3 times failed to restore default settings
AXMP automatic profile 1/2, automatic / manual set voltage, Try it manually set the timing, 2933/3200 are continuous self-test failure to restart the default settings to restore 2133MHz, and finally from the 2400 plus, found that 2667 can run, it is the first bar. More than 2 in the morning is too sleepy

Soc voltage setting not found, it should be only X370, B350 NB / Soc voltage settings should be together, according to AMD bald brother said directly to the north bridge to 1.1, starting the first trial of the next 3, can enter the system, can not AIDA test.
Because it is for the daily use of colleagues, so choose to lower the frequency rather than increase voltage, 3. Can be tested, down to 1.25V, OK, and finally see 1.225V can not be reduced, AIDA pager 2 hours no problem. P95 and linx are not very useful, but I haven't tested it for a long time.
Before watching the online said the Corsair light bar can stabilize the 3200 did not expect a rollover, only a few months and so on the new BIOS to try again, by the way to see if the update can not close the motherboard's red LED.
314ETG bursting articles
It is possible that the screws on the hinges of the side plates are not strong enough. The colleague did not hold the shaft off. It should be unplugged first.
A loud bang of blood spattered on the spot. I didn’t wear socks at the time....
Contact customer service, feeling that the other party is commonplace for such things, paid 40 postage and Shun Feng made a piece of glass + hinge, I think the express order number is a line of excel screenshots... It is estimated that many people's glass is broken
I don't know whether the players in Europe and America or the people in Shenzhen are too ambitious. The screws of the F140MP are extremely difficult to screw. My colleagues and I never used such a big effort in my life. I lost 3 screwdrivers in my arms, and my hand was distressed. (In the middle also put the direction of anti-wrong simply want to commit suicide chasing the wind is not in accordance with the common sense of the LOGO on the back) I guess a lot of people screw this screw and wait for the chassis to smash.
Before you see everyone said that chasing the wind is very poor workmanship material, be regarded as a leader, the chassis did not chamfer many places, there are glitches or sharp edge of the colleague's hand scratched.
Ming Ming and Xing Yuquan, a workshop of the Prix demons, seven language manuals actually not Chinese? But the screw box praised the chassis packaging also did not have a Chinese posing fake foreign devils. Do not know that it is really Europe and the United States big names, like many girls think that step by step of the OPPO is the Korean brand ... we can see the official Chinese website chase wind is extremely simple, the English site is taller than Apple.
CPU_FAN1 is connected to TS-140D, SYS_FAN1 is connected to the outlet, SYS_FAN2 is connected to the front and the outlet is connected, and SYS_FAN3 is connected to the upper inlet.
ROC STRIX-GTX1080's FanCinnect connects the forward and rear air outlets
Found that the motherboard's own fan and F140MP is not the same, is 3Pin's, BIOS changed to DC speed
Back lineColleagues are still more accustomed to the original line of practical risk-free, although the black and thick and tough ship, said that this case is better than Yingguang 301 good alignment, because the back comes with cable management and threaded holes, space is also much larger
The back of the chaos (can not see anyway), more difficult to handle is the thickest 24Pin motherboard line, not close enough to meet the side plate.
ROG BeliefThis configuration I am most satisfied with is this 1080 radiator and Limin 140
The upgraded 6-copper pipe has a heavy weight. Considering adding a graphics card holder, AURA lighting control software is also very easy to use.
Some test run points Game screenshots forgot to copy... Battlefield 4 and DOTA2 are 100~180 frames, I am very satisfied with the temperature control.
After a few years of repeated contact with AMD and overclocking, although there have been some accidents, but still very happy, DIY fun is not here?
Attach a Ruilong series machine tips to those who have already entered the pit and are about to enter the pit.
Thanks for watching
Communication Zinc Alloy Die Casting
Communication Zinc Alloy Die Casting,Aluminium Casting Mold,Aluminum Alloy Die Casts,Motor Housing Part Pressure Metal
Dongguan Metalwork Technology Co., LTD. , https://www.diecast-pro.com