An Announcement on Tender Testing for Tender Testing of Safe Harbor Project for 8 Airports in Airport

No.:-BI-001

I. Project Name: Safe Harbor Project for 8 Airports
Second, project overview
1. Total investment: 109.61 million yuan
2. Project location: Luoxi Town, Xinbei District, Changzhou City.
3. Construction Scale: The total building area is 243,055m2, including residential construction area of ​​176,899m2, commercial building area of ​​5,477m2, public construction supporting building area of ​​4,384m2, aboveground non-volumeable insulation layer construction area of ​​92m2, underground parking and equipment room construction area 56203m2 (according to the plan drawing area).
4. Bidding content: See tender documents for details
5. Plan opening and completion time: December 2017 to July 2019
6. Project size: 5#, 8#, 9#, 10#, 11#, 14#, 15#, 16#, 17# commercial and property, 18# commercial, 19# commercial, community change 3#, 5# , 6#, Basement (East), 1#, 2#, 3#, 4#, 6#, 7#, 12#, 13#, 20# Commercial and 21# Public Building Support, Residential Area Change 1#, 2# , 4#, Basement (West)
Third, the bid segment division:
Bid section
No. Name of the building Construction area
(m2) Estimated price
(RMB 10,000) Bidder Qualification
Category, level Project leader
Professional, grade
1 Construction of Pile Foundation for Safe Harbor Project of 8 Villages in Konggang District 243414.17 150 Qualification Certificate of Construction Engineering Quality Inspection Institution issued by the construction administrative department The person in charge of the project has the qualification certificate for testing and inspection engineers issued by the provincial or above construction administrative department. Senior Engineer
Fourth, other registration conditions:
1, this tender does not accept the Commonwealth bid, only accept online registration.
2. The bidder shall meet the following requirements:
(1) A qualification certificate for a construction project quality inspection agency issued by the construction administrative department must be included in the qualification certificate. The project must include a special inspection of the foundation foundation project (the project must include static load detection and low-strain testing of the bearing capacity of a single pile);
(2) The bidder shall have a CMA certificate of measurement certification issued by the provincial and above technical supervision department, and the content shall include: foundation piles;
(3) The person in charge of the project shall have the job qualification certificate for construction project quality inspection personnel issued by the provincial or above construction administrative department, and the title of the senior engineer. The person in charge of the project must enter the 5.0 database of the bid office (input URL: http://).
(4) Foreign inspection organizations must go through the formalities for registration and registration of credits at the Municipal Construction Management Center. The scope of filing includes the content of the tender.
3. The bid security is 20,000 yuan per unit; it must be transferred from the basic account of the bidder to the bidding security deposit account for the Construction Engineering Management Center of Changzhou City before the cut-off deadline. Account Name: Changbei Xinbei District Construction Engineering Management Center Open bank: Agricultural Bank of China Xinbei Sub-branch Business Department; account number; the first time to pay the bid bond unit must bring the original account opening permit copy of the original and a copy (with official seal) to the Changzhou Xinbei District People's Defense Building 108 . The bidder should fully consider the transit time and ensure that the bid security reaches the bid security special account and issue a receipt before the deadline for bid submission. Annual margin users are required to comply with the Changzhou Urban and Rural Construction Bureau Chang Jian [2012] No. 211 notification requirements.
V. Qualification review related information.
5.1 Original Information Required for Qualification Examination:
(1) Changzhou Construction Project bid application (see Attachment 1);
(2) Bid security receipt;
(3) The identity certificate of the legal representative of the enterprise, the power of attorney of the legal representative of the enterprise, the identity card of the second-generation resident of the trustee, and the second-generation resident identity card of the person in charge of the bidding project;
(4) The trustee and the person in charge of the bidding project must provide the original payment certificate for the payment of the social basic old-age insurance by the bidding unit issued by the social security institution (with the social security center chapter or the social security center for the payment and payment proof electronic special chapter, non-social security manual ), the payment period is from September 2017 to November 2017 for three consecutive months;
(5) Foreign testing organizations must provide Changzhou's "Regional Inspection Unit Credit Management Registration Form".
5.2 Information required for online review of qualifications:
(1) Business license (copy);
(2) Qualification certificate (copy) of construction project quality inspection organization;
(3) "Measurement Certification Certificate" (CMA, copy) issued by the Provincial and above Quality and Technical Supervision Bureau;
(4) The person in charge of the project tests the inspection engineer's job certificate and title certificate.
special reminder:
1 The information required by paragraph 5.1 above must provide the original;
2 The information required by paragraphs 5.1 and 5.2 above must provide two copies of valid copies of each bid. The copies must be bound in the above order and stamped with the official seal of each page.
3 Except for the original ID card, the original identity of the legal representative of the enterprise, the original authorized representative of the company's legal representative, and the original receipt of the bid security bond, the original data of the bid bond must not be bagged or sealed. The qualification data must be bagged and sealed together (Note: sealed bag). The seam must be stamped with the company's official seal) and the mark (note: the name of the project on the sealed bag, the full name of the company, and the official seal of the company and the legal representative's seal). No longer accept supplementary information;
4 The legal representative of the company may not provide a power of attorney to handle bidding matters;
5 If all the necessary information for the post-qualification examination within the specified time is not provided or incomplete, the qualifications shall be examined after being qualified for failure. The originals must be able to fully prove the requirements of the announcement;
6 The qualifications of Section 5.2 shall be based on the information that has been entered into the “Changzhou Construction Project Electronic Tendering System” and the “Enterprise Integrity Database”, and shall be executed according to Article 2(3) of Su Jianzhao [2015] No. 29 document, and the content , The seal is complete, and within the validity period, the qualification examination failed to be entered as required.
6. The legal representative of the bidding unit (or its authorized agent) and the person in charge of the bidding project must bring my second-generation ID card and corporate encryption key to the bid opening site and sign it before the deadline for submission of bids, and proceed with the tender opening procedure. When making a name, submit the identity certificate of the legal representative of the company, the power of attorney of the legal representative, and the original of the second-generation ID card to the tenderer to prove his presence. If remote decryption is required, a written application must be submitted before the deadline for submission of bids. Failure to comply with the above requirements will result in invalid bids for the bid documents.
7. Announcement time:
This announcement is issued from December 13, 2017 to December 18, 2017

7 Inches Tablet PC

The 7-inch tablet can be used as the golden size of a tablet computer. It is small and portable. It can be used at home and outdoors. You can browse the web, watch videos and play games. It is a household artifact. Although the size of the 7-inch tablet is inclined to the tablet, the function is more inclined to the mobile phone, so it can also be used as a substitute for the mobile phone. Compared with other sized tablets, the 7-inch tablet has obvious advantages in appearance and weight. Both the body size and the body weight have reached a very reasonable amount.

1.In appearance, the 7 inch tablet computer looks like a large-screen mobile phone, or more like a separate LCD screen.

2.In terms of hardware configuration, the 7 inch tablet computer has all the hardware devices of a traditional computer, and has its own unique operating system, compatible with a variety of applications, and has a complete set of computer functions.

3.The 7 inch tablet computer is a miniaturized computer. Compared with traditional desktop computers, tablet computers are mobile and flexible. Compared with Laptops, tablets are smaller and more portable

4.The 7 inch tablet is a digital notebook with digital ink function. In daily use, you can use the tablet computer like an ordinary notebook, take notes anytime and anywhere, and leave your own notes in electronic texts and documents.



7 Inches Tablet Pc,Quad Core Tablet 7 Inch,7 Inch Gaming Tablet,Supersonic Tablet 7 Inch

Jingjiang Gisen Technology Co.,Ltd , https://www.jsgisentec.com

This entry was posted in on