22kw Kp1010.15f. 3 Servo Motor for Injection Molding Machine

Model NO.: Kp1010.15f. 3
Starting Mode: Variable Frequency Starting
Certification: ISO9001, CCC, Ce
Brand: Keputek
Motor: Servo Motor
Usage: Injection Molding Machine Servo Motor
Modle: Kp1010.15f.3
Same as: U1010f15.3
Nominal Torque: 128nm
Nominal Speed: 1500rpm
Nominal Power: 22kw
for Oil Pump: 63cc Oil Pump for Injection Molding Machine
Trademark: Keputek
Transport Package: Wooden Box
Specification: CE
Origin: Ningbo, China
HS Code: 8413190000
Motor Identifier: KP1010.15F.3
Nominal torque T100: 128N.M
Nominal speed nN: 1500 RPM
Nominal power Pn: 22 KW
Maximum speed Nmax: 1950 RPM

Rotor inertia Jm: 13.3 kg m2 10-3
Motor insulation: F grade
Winding insulation: H grade
Cooling: Air cooling
Waterproof: IP54
Threshold of built-in PTC: 130 ºC
Pole number: PN=8
Winding connection: Y type
Torque constant Kt: 3.3 Nm/A
Winding resistance Rw: 0.345 Ohm
Winding inductance Lw: 6.169 mH
Nominal voltage Vn: 380 Vrms
Back Electromotive Force @ 1000RPM V1000: 204 Vrms
Nominal current In: 41 Arms
Working frequency Fn: 100 Hz
 
Motor suspended in horizontal position in free still air, ambient temperature of 20 ºC
Motor flanged connection in horizontal position, ambient temperature of 20 ºC
With interference coupling and infinite load inertia applied in the middle of the shaft extension
Standard type
Typical value at tolerance of ±10%



22kw Kp1010.15f. 3 Servo Motor for Injection Molding Machine





 

HNB Device

"Non-burning, nicotine for users, low tar content. As the heating temperature (below 500℃) is lower than the combustion temperature of traditional cigarettes (600-900℃), the harmful components produced by tobacco high-temperature combustion pyrolysis and thermal synthesis are reduced, and the release amount of side-flow smoke and environmental smoke (second-hand smoke) is also greatly reduced."

Heating non - combustion products are electronic devices containing tobacco. When you heat them, they produce a nicotine-containing vapor that you can inhale.

They are different from traditional cigarettes and work by heating tobacco to a very low temperature. Tobacco is heated to 350 ° C in a heat-incombustible device, while traditional cigarettes burn at up to 900 ° C.

Still, the temperature at which non-combustion products are heated is high enough to vaporize and inhale harmful chemicals.

Although both are electronic devices, heated non-combustible products are also different from e-cigarettes or steam devices. These usually use chemical liquids and do not necessarily contain nicotine. E-cigarettes tend to heat liquids to around 250 degrees Celsius to produce vapor.

Hnb Device Oem,Hnb Device Patent,Hnb Device,Hnb Device For Sale

Shenzhen MASON VAP Technology Co., Ltd. , https://www.masonvap.com

This entry was posted in on