Cable design conforms to the national standard "gb_12706.1-2008_ 1th: Rated voltage 1kV (UM=1.2KV) to 3kV (UM=3.6KV) cable" and the International Electrotechnical Commission recommended standard IEC60502 requirements. The low-voltage XLPE insulated power cable consists of a tight-pressed copper or an aluminum conductor, an insulating layer and a protective coating. Cross-linked polyethylene (PE) is a kind of cross-linking method, which transforms the polyethylene molecule from linear structure into three-dimensional network structure by using silane warm water.

The conversion of thermoplastic polyethylene into thermoset crosslinked polyethylene greatly improves its mechanical properties, thermal aging properties and environmental stress resistance, and maintains excellent electrical properties. The normal operating temperature of the conductor of Xlpe insulated cable is 90 ºC, the XLPE cable not only has good electrical performance, has high working temperature and large transmission capacity, but also has the advantages of simple structure, small outer diameter, light weight, convenient installation and use, and no restriction of laying drop.

Widely used in industrial and mining enterprises and urban power grid.

Suitable for transmission overhead lines, with a large self-supporting capacity, overhead span is large, mainly used in rural areas, urban end of the substation to the users of the line connection.

1, the laying of the ambient temperature is not less than 0ºC (less than 0 ºC, should be pre-heating), the cable gap is not limited.

2, the installation of the minimum bending radius stipulated as follows: non-armored single-core cable: 20D, three-core non-armored cable: 15D;

(d in the formula is the actual outer diameter of the cable)

3, the operating temperature of the cable: PVC sheath not more than 90 ºC, polyethylene sheath not more than 80 ºC.

4, the maximum rated temperature of the cable conductor is 90 ºC, the conductor short-circuit (maximum continuous 5S) temperature does not exceed 250 ºC. 5, one or two single-core cable is not allowed to be laid in the iron pipe.






 

Electric Wire Package

Hubei Lisheng Power Cable Co., Ltd. (abbreviation: Lisheng Power Cable) was founded in year 2016, with a total investment of RMB 800 million, or USD 120 million, half of the investment has been completed already.
With a standardized workshop of 46,000.00 square meters, Lisheng Power Cable is mainly engaged in series of high and low voltage power cables of 35KV or less, widely used in many industries, for example, electric power, transportation, energy, engineering construction and so on.
Specific products and service of China Lisheng Power Cable: R&D, design, manufacture, marketing and service of cross-linked, refractory, flame-retardant, common all-plastic power cables, control cables, coaxial cables, pre-branch cables, indoor and outdoor telephone lines, special cables, etc.

Lisheng Power Cable is the key industrial project of the Xiangyang Municipal Government in year 2017. It is the largest cable production project in Northwest Hubei province, and the first local private cable project in Xiangyang City, certified by ISO9001 quality management system, ISO14001 environmental management system, OHSAS18001 occupational health and safety management system, products characterized of "high and low temperature resistance, corrosion resistance, distortion resistance, weather resistance, impact resistance, small cable cross section, strong electrical conductivity and high safety factor etc, total nine major characteristic.
Lisheng Power Cable has obtained national industrial product production license, national compulsory product certification (3C certification), fire-retardant and fire-resistant grade identification authorization certificate etc.
The product technology and performance is in line with leading standard in the related industry in China, products and service warmly welcomed by customers and friends. Cooperate with Lisheng Power Cable, you will get more!


 

Customer Visit
We have a professional sales team with each of them has engaged in this job for 3-10 years,
so that we can provide the comprehensive and professional technology for you. With the perfect quality and after sales service,till now we have exported to more than 80 countries, welcome to visit us and establish win-win business relationship!

FAQ:

I didn't find the cable which I need in this page?
If you didn't find the species of cables you need, please contact us directly, we will reply you quickly.

Are you a trading company or manufacturer?
We are professional manufacturer in Henan, China.

What is the MOQ?
Mostly we sell from stock for normal items, you can buy any quantity unless it is customed-made.

Can you offer me a free sample?
Yes, after price confirmation, you can require for samples to check our quality. Sample is free but the freight charge should be paid.

How long to get the sample?
After you pay the freight charge and send us confirmed files, the samples will be ready for delivery in 3-7 days. The samples will be sent to you via express and arrive in 3~5 days.

How is your package?
Normally packed with coils and cartons, and wooden/steel wooden drums, other ways can be done according you.

How is the payment?
T/T, L/C is accepted.

What is the lead time for mass production?
Honestly, it depends on the order quantity and the season you place the order. The best record we keep is delivering 10 kilometers cable within a week. Generally speaking, we suggest that you start inquiry two months before the date you would like to get the products at your country.

Welcome your inquiry! Any question please feel free to contact me.

Factory Add: No. 116 Tai Zi Wan Road, hi tech Zone, Xiangyang, Hubei, China
Tel: +8618857111724.

Cable design conforms to the national standard "gb_12706.1-2008_ 1th: Rated voltage 1kV (UM=1.2KV) to 3kV (UM=3.6KV) cable" and the International Electrotechnical Commission recommended standard IEC60502 requirements. The low-voltage XLPE insulated power cable consists of a tight-pressed copper or an aluminum conductor, an insulating layer and a protective coating. Cross-linked polyethylene (PE) is a kind of cross-linking method, which transforms the polyethylene molecule from linear structure into three-dimensional network structure by using silane warm water.

The conversion of thermoplastic polyethylene into thermoset crosslinked polyethylene greatly improves its mechanical properties, thermal aging properties and environmental stress resistance, and maintains excellent electrical properties. The normal operating temperature of the conductor of Xlpe insulated cable is 90 ºC, the XLPE cable not only has good electrical performance, has high working temperature and large transmission capacity, but also has the advantages of simple structure, small outer diameter, light weight, convenient installation and use, and no restriction of laying drop.

Widely used in industrial and mining enterprises and urban power grid.

Suitable for transmission overhead lines, with a large self-supporting capacity, overhead span is large, mainly used in rural areas, urban end of the substation to the users of the line connection.

1, the laying of the ambient temperature is not less than 0ºC (less than 0 ºC, should be pre-heating), the cable gap is not limited.

2, the installation of the minimum bending radius stipulated as follows: non-armored single-core cable: 20D, three-core non-armored cable: 15D;

(d in the formula is the actual outer diameter of the cable)

3, the operating temperature of the cable: PVC sheath not more than 90 ºC, polyethylene sheath not more than 80 ºC.

4, the maximum rated temperature of the cable conductor is 90 ºC, the conductor short-circuit (maximum continuous 5S) temperature does not exceed 250 ºC. 5, one or two single-core cable is not allowed to be laid in the iron pipe.






 

Electric Wire Package

Hubei Lisheng Power Cable Co., Ltd. (abbreviation: Lisheng Power Cable) was founded in year 2016, with a total investment of RMB 800 million, or USD 120 million, half of the investment has been completed already.
With a standardized workshop of 46,000.00 square meters, Lisheng Power Cable is mainly engaged in series of high and low voltage power cables of 35KV or less, widely used in many industries, for example, electric power, transportation, energy, engineering construction and so on.
Specific products and service of China Lisheng Power Cable: R&D, design, manufacture, marketing and service of cross-linked, refractory, flame-retardant, common all-plastic power cables, control cables, coaxial cables, pre-branch cables, indoor and outdoor telephone lines, special cables, etc.

Lisheng Power Cable is the key industrial project of the Xiangyang Municipal Government in year 2017. It is the largest cable production project in Northwest Hubei province, and the first local private cable project in Xiangyang City, certified by ISO9001 quality management system, ISO14001 environmental management system, OHSAS18001 occupational health and safety management system, products characterized of "high and low temperature resistance, corrosion resistance, distortion resistance, weather resistance, impact resistance, small cable cross section, strong electrical conductivity and high safety factor etc, total nine major characteristic.
Lisheng Power Cable has obtained national industrial product production license, national compulsory product certification (3C certification), fire-retardant and fire-resistant grade identification authorization certificate etc.
The product technology and performance is in line with leading standard in the related industry in China, products and service warmly welcomed by customers and friends. Cooperate with Lisheng Power Cable, you will get more!


 

Customer Visit
We have a professional sales team with each of them has engaged in this job for 3-10 years,
so that we can provide the comprehensive and professional technology for you. With the perfect quality and after sales service,till now we have exported to more than 80 countries, welcome to visit us and establish win-win business relationship!

FAQ:

I didn't find the cable which I need in this page?
If you didn't find the species of cables you need, please contact us directly, we will reply you quickly.

Are you a trading company or manufacturer?
We are professional manufacturer in Henan, China.

What is the MOQ?
Mostly we sell from stock for normal items, you can buy any quantity unless it is customed-made.

Can you offer me a free sample?
Yes, after price confirmation, you can require for samples to check our quality. Sample is free but the freight charge should be paid.

How long to get the sample?
After you pay the freight charge and send us confirmed files, the samples will be ready for delivery in 3-7 days. The samples will be sent to you via express and arrive in 3~5 days.

How is your package?
Normally packed with coils and cartons, and wooden/steel wooden drums, other ways can be done according you.

How is the payment?
T/T, L/C is accepted.

What is the lead time for mass production?
Honestly, it depends on the order quantity and the season you place the order. The best record we keep is delivering 10 kilometers cable within a week. Generally speaking, we suggest that you start inquiry two months before the date you would like to get the products at your country.

Welcome your inquiry! Any question please feel free to contact me.

Factory Add: No. 116 Tai Zi Wan Road, hi tech Zone, Xiangyang, Hubei, China
Tel: +8618857111724.

Sand Casting

The water glass shell process has low cost, simple operation, and low requirements for raw materials. The basic feature of the process is the use of paraffin-stearic acid low-temperature mold material, and the use of water glass as the binder in the process of shell making. In terms of shell process, its surface quality is average, and its dimensional accuracy is not as high as that of silica sol process, but because of its unique cost, it is widely used in some civil and low-precision internal combustion engines in my country.

Sand Casting,Iron Sand Casting,Oem Sand Casting,Cast Iron Sand Casting Parts

Tianhui Machine Co.,Ltd , https://www.thcastings.com