Model NO.: 12VDC10A18P
Shell Material: Steel Plate
Brand: Chinasky
Application: Security Power
Power: 120W
Input Voltage: 110/220V AC
Output Voltage: 12VDC±5%
Output Current: 10A, 18 Channels
Net Weight: 2kgs
Trademark: Chinasky
Transport Package: White Paper Box
Specification: CE, IEC60950-1, RoHS
Origin: China
HS Code: 850440
12VDC 10AMP CCTV Camera Power Supply Box for 18 Cameras (12VDC10A18P)Description:
12VDC10A18P:1 in 18 Out Boxed CCTV power distribution unit (18 channels)
The CCTV power supply is primarily designed for WUF-GV, PTZ and camera of CCTV system. It's also used for access, building/house control, intrude alarm and other light-current. It is for desktop or wall-mounted installation.
Â
Features:
Power up to 18 CCTV CCTV surveillance cameras
12 Volts DC
10 Amp total output
Max output current up to 1.1 Amp/Channel
18 individually PTC auto-reset fuses protected outputs
Switch mode power supply (regulated voltage)
Integral surge protection
Individual LED power indication
Individual PTC reset-able fuses
Internal On/off safety power switch with LED indicator
Beige metal housing
Â
Technical specifications:
| 12VDC 10AMP CCTV Power Supply for 18 Cameras (12VDC10A18P) | ||
| Model | 12VDC10A18P | |
| Power | 120W | |
| Metal Case Dimension | 24.5×20.8×8.3cm | |
| Net Weight | 2kgs | |
| Input | Input Voltage | 110/220VAC |
| Input Voltage Frequency | 50Hz-60Hz | |
| Average Input Current | 100Vac≤1.6A | |
| Efficiency | ≥80% | |
| Output  |
Output Voltage | 12VDC±5% |
| Output Current | 10A, 18 channels for 18 sets load | |
| Output Ripple Noise(Vp-p) | 110mVp-p@25ºC/ Rated input voltage & Rated output load |
|
| Reply Time of Starting up | ≤3S Input 100Vac, Rated output load | |
| Fuse | Type /Rating | PTCÂ 1.1A/60V |
| Protection | Over Voltage Protection | When over voltage occurs, it will switch to self-protection status to protect the load. |
| Over Current Protection | When over current occurs, the corresponding channel output will automatically switch to self-protection status, and the other channels output will work normally. When the fault is cleared, it will switch back to normal. | |
| Short-circuit Protection | When short-circuit occurs, the individual PTC fuse will break the circuit. When the fault is cleared, it will switch back to normal automatically. | |
| Circumstances | Working Temperature | 0ºC-+50ºC |
| Storage Temperature | -20ºC-+80ºC | |
| RH | 20%-90% | |
| Heat Release | Natural heat dissipation | |
| Connection | Input | Three-pin socket |
| Output | 18 channels output | |
| Dielectric Strength | Input to output | 1500Vac/60S leakage current≤1.5mA |
| Input to FG | 1500Vac/60S leakage current≤2.0mA | |
| FG to output | 500Vac/60S  leakage current≤1.5mA | |
| Insulating strength | Input to output | ≥20MΩ/500VDC@25ºC |
| Leakage Current | ≤0.02mA @AC110V(220V)/25ºC | |
| RG | ≤0.012Ω@DC8V/25A/25ºC | |
Competitive Advantages:
This is one of the best 12VDC CCTV power supply boxes on the market for security cameras.
We replace the cheap "glass fuse" with "PTC" Reset Fuses which will Auto Reset after you fix the short. You don't have to run around town try to find the replacement fuses. All you have to do is to fix the shorts.
The red light shorts indicator helps you to know which camera is not working.
Dependable and long lasting
Warranty: 2 years
Â
PCB Spring Terminal Block Section
PCB Spring Terminal Block
It is a new type of terminal block with spring device, which has been widely used in the world's electrical and electronic engineering industry: lighting, elevator lifting control, instruments, power supply, chemistry and automobile power, etc.
Spring type terminal block
Spring type PCB terminal, the connection mode is divided into cage spring connection and butterfly spring connection, which is fast and convenient for wiring and improves the operation efficiency.
It can be used to connect all types of conductors with cross-section of 0.2mm to 16mm, with spacing of 2.5mm-15.0mm.
PCB Spring Terminal Block
ShenZhen Antenk Electronics Co,Ltd , https://www.antenkconn.com